Boats

Easy to use this small but yet very powerfull two channel radio control speed boat will give you plenty of fun on the water
Model is powered by a RS380sh motor and uses a 9.6volt recargable battery. Comes with a very easy to use trigger type controller just charge and go
Be quick, this model at under £20.00 is now low on stock
4 hour charge will give you about 10-15 minutes run.
Black and yellow variant is on 40mhz

Easy to use this small but yet very powerfull two channel radio control speed boat will give you plenty of fun on the water
Model is powered by a RS380sh motor and uses a 9.6volt recargable battery. Comes with a very easy to use trigger type controller just charge and go
Be quick, this model at under £20.00 is now low on stock
4 hour charge will give you about 10-15 minutes run.
Black and yellow variant is on 40mhz

Pre-Painted and Pre-Assembled Scale Fishing Boat.
VERY LIMITED STOCKS, YOU WILL NEED TO BE QUICK!

R/C side-wheel-paddle tug.
Semi-scale model design for single electric motor or steam-engine drive.
4 channels. Quickie kit with moulded hull.
found in group True-to-nature|function boats

Product information

Paddle wheel set.
Contains all parts required for building a pair of paddle
wheels for installation into side-wheel paddlers. All floats
(blades) of the wheels are movably mounted. Their attitude
is eccentrically steered via a system of pushrods

Model of the U.S. Navy high-speed torpedo boat which was commanded by the later President of the USA, John F. Kennedy. During a mission the PT-109 was rammed and sunk by a Japanese destroyer. For his gallantry in saving the vessel's crew JFK was awarded the Medal of Honor - the American armed forces' highest decoration for bravery in wartime.

Pre-Painted and Pre-Assembled Scale Fishing Boat.
VERY LIMITED STOCKS, YOU WILL NEED TO BE QUICK!

R/C Pioneer 1:25 scale, this slick looking radio control boat features single 380 type motor drive and rudder control for sharpe left and right turns. This comes complete with battery and charger for the model, just charge and go! All for an amazing low price of £20.00 be quick!

R/C Pioneer 1:25 scale, this slick looking radio control boat features single 380 type motor drive and rudder control for sharpe left and right turns. This comes complete with battery and charger for the model, just charge and go! All for an amazing low price of £20.00 be quick!

Pre-Painted and Pre-Assembled Scale Fishing Boat.

VERY LIMITED STOCKS, YOU WILL NEED TO BE QUICK!

New Thunder Tiger Odyssey II racing yacht

Great calm water fun with this small speedboat at a small price!
single motor with rudder control for sharpe left and right turns.3.5 hour charge will give you about 10-15 minutes run. Be quick at £20.00 this boat is selling fast!
red variant is on 27mhz

Pre-Painted and Pre-Assembled Scale Fishing Boat.
VERY LIMITED STOCKS, YOU WILL NEED TO BE QUICK!

For centuries, the call of the sea has beckoned those intrepid souls that long for the thrill, adventure, and mystery of sailing.

Great calm water fun with this small speedboat at a small price!
single motor with rudder control for sharpe left and right turns.3.5 hour charge will give you about 10-15 minutes run. Be quick at £20.00 this boat is selling fast!
yellow variant is on 40mhz

Radio-controlled semi-scale model of a launch to 1:20 scale

The Perkasa was the lead boat of a class of four vessels built by Vosper Thornycroft in Southampton for the Royal Malaysian navy in 1967. Four others were built for the Royal Navy.

Sleek and stylish at 650mm in length this model comes with twin 380 type motors and is powered by a 7.2 volt tamiya type racing pack.
Model includes a two channel transmitter for your left and right control and mains 4 hour charger
Super price of only £24.99 best seller

READY TO RUN SOUTHAMPTON TUG

FITTINGS PACK FOR THE ROBBE DOLLY

Powerful racing boat with 380-type motor through twin props generating huge thrust! A superb price not to be beaten!
Includes the 8 x AA batteries required for the transmitter.
and a 7.2v 1800mah battery and charger

lenth 700mm
width 350mm
red variant is 27mhz

The ready to run NEPTUNE SB-1 is the first underwater RC model from Thunder Tiger. Equipped with high technology operating equipment in the inner hull tub, covered by the bright yellow outer hull, the SB-1 will let you enjoy the otherwise hidden wonders of the underwater world.

Powerful racing boat with 380-type motor through twin props generating huge thrust! A superb price not to be beaten!
Includes the 8 x AA batteries required for the transmitter.
and a 7.2v 1800mah battery and charger

lenth 700mm
width 350mm
yellow variant is 40mnz

Completed in just two or three hours, the 50cm long Rainbow ll requires only a standard two-channel RC system and yet offers all the well- known advantages of robbe sailing boats in a vessel of extremely compact dimensions.

This twin-motored fast cruiser is supplied with an 8.4v rechargeable battery pack, charger, handset and stand!
This models comes fully assembled and just requires 8 x AA batteries to complete

Great value 'full function' tugboat with lights and working water cannon! Just look at the new price! This is one of our best selling boats a really fantastic model.

The NEPTUNE SB-1 is the first underwater RC model from Thunder Tiger. Equipped with high technology operating equipment in the inner hull tub, covered by the bright yellow outer hull, the SB-1 will let you enjoy the otherwise hidden wonders of the underwater world.

Fantastic super fast twin motor speed boat.
Over 90cm long!!

Fantastic super fast twin motor speed boat.
Over 90cm long!!

The first Dragen was built in 1929 in Gothenburg, Sweden.

Radio-controlled motor yacht to 1:20 scale

Surmount 800 Racing YachtSurmount800 is a ready-to-sail radio controlled competition sailboat that has been designed from the keel up to handle like a full-scale racing yacht —not a toy like other RC sail boats.

MICRO MAGIC is based on the relatively small one-man yachts which compete in trans-Atlantic regattas.

The Marlin 600 is the obvious choice if you are looking for a spirited off-shore racing boat which you can get onto the water in a hurry.

With her streamlined hull and integral keel fin the elegant Comtesse is capable of an impressive turn of speed even in just a light breeze.

- Kit containing ready-made components
- Quick to assemble, as no parts have to be trimmed or adjusted
- Injection-moulded plastic hull and deck
- Lightweight aluminium mast
- Keel bulb protected by plastic fairings
- No painting required
- Decal set included
- Simple RC component installation
- Model supplied complete except for RC components
- Light-wind sailing boat: up to wind strength 3

The Monsoon 900 RC Sailboat needs to be seen to be believed and makes the ideal starting boat for the hobbyist that wants a boat with performance to keep you entertained for a long time to come.

THE NEW THUNDER TIGER YOYAGER 2

Graupner HMS Hood. Due the the size and fragile nature of this boat we are unable to send and request the model is collected in person

Graupner Bismarck. Due the the size and fragile nature of this boat we are unable to send and request the model is collected in person

GRAUPNER WP SCHLEPPER ARES 3
Order number 2087

RC Sailboat-Phantom
With its huge sail bright colours and carbon fibre effect hull, this is a very striking and fast R/C Yacht.

MICRO MAGIC is based on the relatively small one-man yachts which compete in trans-Atlantic regattas.

Introducing a famous America’s Cup yacht, the ETNZ (Emirates Team Of New Zealand)

Radio-controlled model of an off-shore racing boat to 1:25 scale

Power 710/12 electric motor and suppressors

Stern tube, shaft and propeller

Motor cooling set

Navy Direkt 2000 mounting unit

Navy Universal coupling

Small items

AMRICAS CUP YACHT, CHINA TEAM

THE NEW GRAUPNER MICRO MAGIC CARBON EFFECT EDITION

- Kit containing ready-made components
- Quick to assemble, as no parts have to be trimmed or adjusted
- Injection-moulded plastic hull and deck
- Lightweight aluminium mast
- Keel bulb protected by plastic fairings
- No painting required
- Decal set included
- Simple RC component installation
- Model supplied complete except for RC components
- Light-wind sailing boat: up to wind strength 3

Radio controlled semi-scale model of a harbour tug to 1:50 scale.

Contains all the parts required to give the model a detailed scale appearance, e.g. anchor, anchor winch, bollards, liferaft, masthead and navigation lamps (can be made to work), towing and warping winch, tyre fenders and many other small items.

Radio-controlled model sailing boat with GRP hull and double mainsail

Radio-controlled one-metre sailing boat. An ideal beginner´s boat in the international one-metre class

Scale model of a cutter to 1:20 scale

Product information

Field of operation of the fullsize fishing cutters is mainly the North Sea. The vessels are equipped with powerful
combustion engines. The sails of the mizzen mast near
the stern only serve to stabilize the cutter when running. Despite its small dimensions (scale 1:60th) the model
duplicates the fullsize counterpart well. Thanks to its ready-formed hull moulded of ABS plastic and the many injection-moulded parts the model can be assembled in a short time, requiring little skill for its completion.

Semi-scale model of a Cup sailing yacht

The robbe Estelle is the ideal sailing boat for all modellers and would-be modellers who are seeking the essential core activity of this splendid hobby - sailing model yachts on inland waters in light to moderate winds.
The overall design and technical lay-out of the robbe Estelle follow the current trend towards broad hulls of the yawl type. This special hull design offers the advantage of increased rigidity, fast sailing in suitable winds and choppy water, combined with excellent rudder response. The model´s high reserves of displacement mean that it exhibits no tendency to tuck under on downwind tacks.
Reasonable building time, distinctively elegant design and a fair system price are the crucial features of the robbe Estelle, making it the ideal craft for making a start or trying a "new tack" in the world of sailing boats, where this kit is superior to most of the opposition.

Radio-controlled model of a working ship with salvage crane to 1:25 scale

The Smaragd (Emerald) is a large model which can be sailed even in quite strong winds, and in its basic version can be controlled with a simple two-channel radio control system.

Radio-controlled semi-scale model of a two-masted schooner to 1:20 scale

With her streamlined hull and integral keel fin the elegant Comtesse is capable of an impressive turn of speed even in just a light breeze.

Experience for yourself the fascination of fast off-shore racing boats with our model of the Lightning 46.

Radio-controlled water sport boat with ready-made hull and electric power system

Model submarine with electric power and dynamic diving system

SAN DIEGOMOTOR YACHT

Scale model of the "Düsseldorf" fire-fighting boat to 1:25 scale

Scale model of a high-speed mine-sweeper to 1 : 40 scale

Radio-controlled model sailing boat with GRP hull and double mainsail

Scale model of a coastal police boat to 1:25 scale.

Radio-controlled one-metre sailing boat. An ideal beginner´s boat in the international one-metre class

Semi-scale model of a luxury motor yacht to 1:15 scale

One of the most interesting ship developments of the second World War, both visually and technically, was the S-boat, and the S 130 is a typical representative of the class.

Semi-scale model of a Cup sailing yacht

The robbe Estelle is the ideal sailing boat for all modellers and would-be modellers who are seeking the essential core activity of this splendid hobby - sailing model yachts on inland waters in light to moderate winds.
The overall design and technical lay-out of the robbe Estelle follow the current trend towards broad hulls of the yawl type. This special hull design offers the advantage of increased rigidity, fast sailing in suitable winds and choppy water, combined with excellent rudder response. The model´s high reserves of displacement mean that it exhibits no tendency to tuck under on downwind tacks.
Reasonable building time, distinctively elegant design and a fair system price are the crucial features of the robbe Estelle, making it the ideal craft for making a start or trying a "new tack" in the world of sailing boats, where this kit is superior to most of the opposition.

This 44-foot Coast Guard is a very seaworthy lifeboat, designed to carry out search and rescue assignments in poor weather and water conditions.

The Smaragd (Emerald) is a large model which can be sailed even in quite strong winds, and in its basic version can be controlled with a simple two-channel radio control system.

This twin "380" motor power boat is supplied with a 7.2v rechargeable battery pack with handset, stand and charger - another Howes bargain at just £25!
This models comes fully assembled and just requires 6 x AA batteries to complete.

Designed in the USA. After minor adjustments the vessel is now doing duty in British coastal waters for the Royal National Lifeboat Institution.

Fantastic fun R/C Surfer! Supplied with a7.2volt battery and charger but will require 8 x AA batteries for the transmitter.

Scale model of a German U-boat to 1:40 scale, with dynamic diving system
fittings and electric motors included

T-18 READY TO RUN R/C RACING BOAT YELLOW

T-18 READY TO RUN R/C RACING BOAT YELLOW

T-18 READY TO RUN R/C RACING BOAT WHITE

T-18 READY TO RUN R/C RACING BOAT WHITE

This speedboat (1000mm long) is powered by twin '550' watercooled motors with a 7.2v 3600 battery and charger plus transmitter batteries all included in the price!huge boat at a fantastic price! white variant 27mhz

This speedboat (1000mm long) is powered by twin '550' watercooled motors with a 7.2v 3600 battery and charger plus transmitter batteries all included in the price!huge boat at a fantastic price! white variant 27mhz

This speedboat (1000mm long) is powered by twin '550' Watercooled motors with a 7.2v 3600 battery and charger plus transmitter batteries all included in the price!huge boat at a fantastic price! yellow variant 40mhz

This speedboat (1000mm long) is powered by twin '550' Watercooled motors with a 7.2v 3600 battery and charger plus transmitter batteries all included in the price!huge boat at a fantastic price! yellow variant 40mhz

Radio-controlled semi-scale model of a two-masted schooner to 1:20 scale

Powerful racing boat with 380-type motor through twin props generating huge thrust! A superb price not to be beaten!
Includes the 8 x AA batteries required for the transmitter.
and a 7.2v 1800mah battery and charger

lenth 700mm
width 350mm
red variant is 27mhz

Powerful racing boat with 380-type motor through twin props generating huge thrust! A superb price not to be beaten!
Includes the 8 x AA batteries required for the transmitter.
and a 7.2v 1800mah battery and charger

lenth 700mm
width 350mm
yellow variant is 40mnz

Scale model of an ocean-going salvage tug to 1 : 50 scale

1 : 40 scale dynamic-diving model of the German Federal Navy’s 212-class submarine

Scale model of the type XXI submarine to 1:40 scale for dynamic diving.

This R/C Atlantio 059 features twin motor drive. This comes complete with battery and charger for the model, just charge and go!

Scale model of the cruise and expedition ship to 1 : 100 scale

The Dana is a typical fishing cutter from North Zealand in Denmark.
Around the turn of the century, many boats of this type sailed in along the Danish coast. During the 1920"s many of the cutters were fitted with engines, which enabled an even quicker landing of the catch.

This shrimp cutter is a typical cutter from the 1960"s used for catching shrimp off the German, Dutch and Danish coasts. The equipment on board includes the necessary shrimp sieves and cookers for immediate preparation of the catch.

Block. 10 mm X 10.

300.14 Lifebelt 14mm X 5

300.33 Lifebelt 33mm X 1

300.25 Lifebelt 25mm

300.20 Lifebelt 20mm X 1

300.30 Lifebelt 30mm X 2

300.9 Lifebelt 9mm X 10

301.1 Bollard 16x6mm X 10

301.2 Bollard 18x7mm X 10

302 Double Bollard 17x8x4mm X 10

303.1 Fairlead 19x3.5mm X 10

303.0 Fairlead 7x3mm X 10

Plastic Fairlead 13x2.5mm X 10

304.2 Cowl Vent 35mm X 1

304.0 Cowl Vent 12mm X 10

304.0 Cowl Vent 12mm X 10

Cowl Vent 22mm X 1

305.3G Porthole 17mm Gold Finish X 10

305.3 Porthole 17mm X 1

305.1G Porthole 9mm Gold Finish X 10

305.1 Porthole 9mm X 10

305.2 Porthole 13.5mm X 10

305.6 Flanged Porthole Brass 6mm X 10

305.12 Flanged Porthole Brass 12mm X 10

Plastic Porthole with transparent glass. 13.5mm outer diameter, 10 mm inner diameter. Gold Metallic finish X 10

306 Stepladder 140mm X 1

305.8 Flanged Porthole Brass 8mm X 10

Masthead Light. Transparent plastic lens. 24 mm

309 Searchlight 13x23mm X 1

311 Foghorn 22mm X 1

311S Foghorn Silver Finish 22mm X 2

Plastic Cross Bollard
13mm - Base Plate 10x10mm X 10

328 Lifeboat (Cutter) 50mm X 1

329 Block 4mm X 100

Hand crank anchor windlass with brake handle.
Supplied in kit-form 25x33x38mm

336.1 Admiralty Pattern Anchor 23mm X 1

Admiralty Pattern Anchor Length 35mm X 1

341.2 Hall Anchor 27mm X 1

341.3 Hall Anchor 55mm x 1

Hall Anchor 40mm X 1

Hall Anchor 18mm x 1

Admiralty Pattern Anchor Length 50mm

353.2 Searchlight 12x18mm

353.3 Searchlight 14x22mm X 1

353.1 Searchlight 9x14mm

374 Double Cruciform Bollard 28x12mm X 10

375.30 Lieutenant Commander

375.31 Lieutenant

375.34 Seaman

375.32 Corporal

375.33 Lance Corporal

379 Steering Wheel 18mm X 1

382 Double Cruciform Bollard 23x6mm X 5

Plastic Bollard
30x8x9mm X 5

Plastic Double Bollard with Cross
36x11mm X 10

391 Companionway Ladder 76mm X 1

Working monitor, unassembled. 74x62x20mm.

A building slip for models up to 90 cm long.

RS 1 was built in 1893 for the "Norwegian Society for Shipwreck Salvage" at the Colin Archer shipyard in Rekkevig near Larvik, Norway.

422 Rigging Thread 0.7mm x 50Mtr

423 Rigging Thread 1.0mm x 50Mtr

MRB 20 "Emile Robin" was delivered from the North Sea Shipyard in Ringk, Denmark, in 1989.

430.45 Rudder Set 45mm Blade

430.35 Rudder Set 35mm Blade

430.55 Rudder Set 55mm Blade

Gotheborg is a replica of a vessel, owned by The Swedish East India Company, formed in 1731 in Gothenburg.

434 Krabbe Ton 12 Fittings Kit

436 Double Cruciform Bollard 14x8mm X 10

A three-masted warship launched in 1765.

438 Oar Single 84mm X 10

440 Cleat 6mm X 10

449 Torpedo Cleat 14mm X 10

Henry Hudson (1565-1611) was an English explorer who received a commission from the Dutch East India Company to find a Northern trading route to China and Japan.

450.4 Rail Stanchion 2 hole 33mm X 10

450.3 Rail Stanchion 2 hole 25mm X 10

Brass. Height 10mm for 0.5mm railing X 10

Brass. Height 15mm for 0.5mm railing X 10

456 Lifeboat (Cutter) 86mm

464 Pear Block 10mm X 10

2 hole block. 6 mm X 10

The Mary Ann is the model which Billing Boats started with in 1958.

The Cux 87 is a typical German trawler from the Deutsche Krabbenkutter Werft. This type of boat is often seen in the small harbours along the North German coast.

A typical trawler from the North Sea, built in 1970 at an English shipyard. The model kit is based on the original ship drawings.

476 Wheel 25mm X 1

Smit Rotterdam was built in 1975 for Smit International BV in Holland, and was at the time of its completion the largest and most powerful tugboat in the world.

478 ELKE FITTINGS

479 Oar Single 70mm X 5

481 Lantern 360 Degree 21mm X 1

A thre-masted royal ship launched in 1627.
Length 70.00 m, breadth 11,50 m, draught 4,80 m, displacement 1,400 tons, sail area 1,150 m2, with a crew of 133 sailors and 300 soldiers.

An armed merchant vessel launched in 1787.

B498 HMS Victory

Double Planked do-it-yourself Lasercut Wooden Boatkit
Scale 1:75 - Length 134 cm (52.75 inches)
Parts in wood and brass
Full step by step instruction and plans

THE NEW BILLINGS ABSONAL NAVAL SHIP

THE NEW VARNADIS SCHOONER

This vessel was built in 1965 at the N.V. Scheepswerven in Millingen, Holland, and called "Maasbank". In September 1977 it was renamed "Banckert".
The Maasbank served for 12 years in the Western part of Holland. Length 32.75 m, breadth 7,85 m, draught 3,40 m. The engine yields 1800 HP.

When three men met in early 1949 at a Seattle sailboat shop, none of them could have foreseen the peculiar and far-reaching consequences of their joint venture to build a better race boat.

THE NEW MONTEREY LOBMASTER BOAT

EVELYN ROSE

The Andrea Gail, an un-inspected commercial fishing vessel departed Gloucester Harbour, Massachusetts, September 20, 1991 with six crewmembers on board. The crew intended to make a fishing trip for swordfish in the area of the Grand Banks of Newfoundland, Canada.

The Smit Nederland was built in 1979 at the BV Scheepswerft & Machinefebriek "De Merwede" in Hardinzveld, Holland.

This original design can be seen in many ports along the French Channel. The boats are socalled stern trawlers, in which the net is pulled in using a tricing line in the rear of the boat. The hull is of steel; and the length is 11 m.

The Calypso was built in the USA in 1942 as a minesweeper.

A tea clipper launched in 1869.

A model of a typical American motor boat, used for tuna fishing in Florida in particular. A motor boat model with plastic hull, especially designed for model builders interested in an RC model.

The schooner Bluenose has a very special place in the history of navigation and yachting.
Built to fish off the Newfoundland coast, the ship soon turned out to be such a fast sailer that she won all the great classical regattas along the USA"s Eastern coast. She was built in Nova Scotia in l921, and shipwrecked near Haiti in 1946. A true copy - Bluneose II - was launched in 1964.

Lilla Dan was built in 1951 at the well-known shipyard in Svendborg, Denmark, by J. Ring Andersen, and constructed mainly of oak and beach.

Built as the 19th Century was drawing to a close. This is a "dundee" of 50-60 tons and equipped with many sails, making necessary a ballast of 20-25 tons and a 12-man crew.

The first Dragen was built in 1929 in Gothenburg, Sweden.

This 44-foot Coast Guard is a very seaworthy lifeboat, designed to carry out search and rescue assignments in poor weather and water conditions.
With a skilled and experienced crew, this vessel can carry out the most demanding of rescue operations. The vessel is selfstabilizing. Built in 1961 at the Coast Guard shipyard in Curtis Bay, Maryland, USA.

This is the ship which gave its name to the movie starring Katherine Hepburn and Humphrey Bogart.
The story takes place during World War I. The African Queen attacks the German warship "Kin Luise" on Lake Victoria in Africa, after a long and dangerous trip down the tributaries to the lake. The Billing Boats model has a plastic hull and imitation steam engine.

The Zwarte Zee was built in 1963 at J. & K. Smit"s Scheepswerven N.V. in Kinderdijk, Holland.

The schooner Bluenose has a very special place in the history of navigation and yachting.

A 280-ton bark built for F.T. Everard & Sons in Great Yarmouth in 1925 to 1926.

The Norden is a typical coaster of the kind which was earlier very commonly used along the Western coast of Denmark.

This ship is a 50-foot steam pinnace from around the middle of the 19th Century.

The St. Roch was built at the Burrard Dry Dock in North Vancouver in 1928, intended for sailing in Arctic waters.

RS 1 was built in 1893 for the "Norwegian Society for Shipwreck Salvage" at the Colin Archer shipyard in Rekkevig near Larvik, Norway.

The Andrea Gail, an un-inspected commercial fishing vessel departed Gloucester Harbour, Massachusetts, September 20, 1991 with six crewmembers on board. The crew intended to make a fishing trip for swordfish in the area of the Grand Banks of Newfoundland, Canada.

1850 - On the urging of the New York Yacht Club to build a fast sailing boat, George Steers creates plans for the AmericA. The low black schooner is designed using the reversal of the "cod-head-and-mackerel-tail style."

631 Lantern 360 Degree 15mm X 2

632 Lantern 360 Degree 17mm X 2

637 Lantern 360 Degree 9mm x 1

638 Deck Lamp 8mm X 1

Plastic Bollard 22x8mm X 10

672 Companionway Ladder 46mm

677 Rope Block 27mm X 1

687.25 Running Lights 25mm

687.21 Running Lights 21mm

687.35 Running Lights 35mm

Nickel-plated metal, with miniature bulb 3 V/100 mA, supplied in pairs (red and green). 30 x 12mm

Built in l93l at the Frederikshavn Shipyard in Denmark, St. Canute sailed for many years as a tugboat and icebreaker in the Odense harbour under its original name St. Knud.

A typical Danish seiner, with a gross tonnage of 63.43 and built in 1929/1930 at the Nyborg Shipyard in Denmark.

This Viking ship, dating from about 1000 A.D. was found in 1957 in the bay at Roskilde in Denmark.

Three Mastet Topsail Schooner "SIR WINSTON CHURCHILL" The Schooner was built in 1965 at the Richard Dunston Ltd., Shipyard in Hessle, Yorkshire, GB, for the "Sail Training Association" in Bosham.

A three-masted galleon launched in 1615. Length 19.50 m, breadth 7.95 m, draught 3.35 m and a displacement of 180 tons.

OFF-SHORE WARRIOR: BRUSHLESS MOTOR MINI HYDRO BOAT

SEA RIDER: BRUSHLESS MOTOR MINI CATAMARAN

SEA DRIFTER: BRUSHLESS MOTOR MINI HYDRO BOAT

Hardwood deck planking strips, radar unit, multi-part anchor winch, ship"s bell, bollards, searchlights, navigation lamps, railings, flags, aerials, mast, life-rafts and other small parts.

Comtesse Fitting Set

Smaragd Fittings Pack

BALLAST KEEL FOR THE ROBBE SMARAGED

SMARAGED ALUMINIUM MAST

1081 Mast Lantern 8x7mm X 2

1082.12 360 Degree Masthead Lamp 12 mm X 1

Working 360-degree masthead lamp with mount. nickel-plated. 3v Lamp Height 17mm. X 2

1088.8 Navigation Lights 8mm

1088.10 Navigation Lights 10mm

Nickel-plated metal, with miniature bulb 3V/100 mA, supplied in pairs (red and green). 10 mm high.

1089 Searchlight 10x17mm x 1

To give your PT 15 a realistic scale appearance, the fittings set includes parts such as the anchor, bollards, lifebelts etc.

Various ventilators, companionways, towing gear, lifebelts, lamps, blue light, searchlight, bollards, anchor, railing stanchions, signal horn etc.

Happy Hunter Fitting set

Happy Hunter Power Set

Antje Fittings Pack comprising the standard fitting

ANTJE WOOD FITTINGS PACK

1130 Anchor Chain 3mm

ATLANTIS BALLAST KEEL

GENOA SET FOR THE ATLANTIS

WOOD FITTINGS SET FOR THE ATLANTIS

FITTINGS SET FOR THE ATLANTIS

Graupner Motor Mount 500-700

Hanseatic Fittings pack including 1178 fitting set and 1179 motor set.

Schutze Fitting Set

Schutze Power Set

Copper coloured chain, for flat anchor 1m

Non-scale model of a typical harbour tug, as commonly operated in large ports
High-quality ready-made model

MICRO MAGIC is based on the relatively small one-man yachts which compete in trans-Atlantic regattas.

THE NEW GRAUPNER MICRO MAGIC CARBON EFFECT EDITION

- Kit containing ready-made components
- Quick to assemble, as no parts have to be trimmed or adjusted
- Injection-moulded plastic hull and deck
- Lightweight aluminium mast
- Keel bulb protected by plastic fairings
- No painting required
- Decal set included
- Simple RC component installation
- Model supplied complete except for RC components
- Light-wind sailing boat: up to wind strength 3

MICRO MAGIC is based on the relatively small one-man yachts which compete in trans-Atlantic regattas.

R/C fishing cutter.
Semi-scale model design
for single electric motor drive.
4 channels. Quickie kit with moulded hull and superstructures.
found in group True-to-nature|function boats

R/C side-wheel-paddle tug.
Semi-scale model design for single electric motor or steam-engine drive.
4 channels. Quickie kit with moulded hull.
found in group True-to-nature|function boats

R/C fishing cutter.
Scale model of a fishing cutter for electric drive.
2-8 channels. Quickie kit with moulded hull.
found in group Powered true-to-nature|function boats, 6-channels

The crab-fishing cutter TÖN 12 KRABBE is a fishing vessel mainly operated in the North Sea. It is specifically designed for fishing crabs and carries a special type of purpose-designed rigging for the job. The large fishing nets are carried by two outrigger booms, heaved up almost to the mast during the run to the fishing grounds.

R/C harbour tugboat.
True-scale model design
for single E-motor drive.
2-12 channels. Quickie kit with moulded hull.
found in group Powered true-to-nature|function boats, 6-channels

2500 Deadeye 5mm X 10

Waterproof Switch Cover

High performance geared drive system for model boats. Simple to install.Set contents: complete with electric motor, propeller shaft, 3,3:1 gear reduction and 45 mm propeller.
For models: 1-1000 Police Boat W3 (2 required), 1-1100 Dusseldorf Fire Boat (2 required), 1-1097 PT15 Torpedo Boat (1 required).

Pre-Painted and Pre-Assembled Scale Fishing Boat.
VERY LIMITED STOCKS, YOU WILL NEED TO BE QUICK!

Pre-Painted and Pre-Assembled Scale Fishing Boat.
VERY LIMITED STOCKS, YOU WILL NEED TO BE QUICK!

Pre-Painted and Pre-Assembled Scale Fishing Boat.

VERY LIMITED STOCKS, YOU WILL NEED TO BE QUICK!

Pre-Painted and Pre-Assembled Scale Fishing Boat.
VERY LIMITED STOCKS, YOU WILL NEED TO BE QUICK!

M/S KONG HARALD