TCS Decoders

This decoder is small enough for N scale but strong enough for HO! From the start the design criteria for the M1 decoder was to make it small for N scale but fully capable of powering HO locos! At 0.355" wide and 0.132" thick it will fit in many N-scale locos. With its smooth and strong 1amp motor drive it is well-suited for many HO locos especially where space is at a premium.

1.0 amp 2-function decoder with 8-pin NMRA/NEM652 plug.

A powerful hard-wire decoder for Z, N and light duty HO/OO scale.
1 amp continuous, 2 amp peak motor drive with 2 x 60 mA lighting functions.
Features:
Back EMF for superior slow speed control even with heavy loads.
Quiet Drive creates SUPER QUIET engine performance.
Autodetect for realistic throttle response when using DC power.
Function Remapping
Standard 2 digit or extended 4 digit addressing.
User Loadable Speed Tables for custom speed curves.
14 or 28/128 Speed Step Control operating at 256 speed steps.
Additional lighting features not listed above include Random Flicker, Single & Double Strobe, and Constant Dim light.

Dimensions: 0 .51" x 0.26" x 0.11" or 12.95mm x 6.6mm x 2.79mm

Direct-fit,(hardwire, no harness) 8-pin NEM 652 loco decoder providing 1.0amp continuous and 2.0amp peak. With back EMF and 2 x 100mA function outputs.
Decoder size = 11.7mm x 17.5mm x 3.5mm

Function only decoder (will not support motor current)suitable for 2 x 200mA functions. Supplied with wire harness but no plug.
Decoder size = 21.03mm x 11.43mm x 3.81mm
NB; Illustration shows FL2 and FL4 decoders

Powerful decoder with 8-pin harness. Suitable for HO/OO and N with three 10mA function. Provides 1.3amp continuous and 2amp peak current draw. Features back-EMF.
Size 14.4mm x 9.12mm x 3.43mm
NB; Illustration shows M1 M3 & M4 decoders

1.0 amp 4-function decoder with 8-pin NMRA/NEM652 plug.
Size = 18.5mm x 10.6mm x 4.8mm

Function only decoder (will not support motor current). Four 200mA function outputs each .5 amp continuous and 1.0 amp peak capacity.
Size of decoder = 14.86mm x 9.14mm x 2.92mm
NB; Illustration shows FL2 & FL4 decoders

An HO/OO scale decoder with 8-pin harness. This decoder can be hardwired or plugged straight into locomotives fitted with NMRA 8-pin sockets. Provides 1.3 amp continuous and 2 amp peak draw. The T4X features TCS exclusive auto-adjusting BEMF.
The T4X is a motor control decoder with four lighting functions (forward/reverse light, and two extra functions)
Dimensions .956”x.655”x.207” or 24.28mm x 16.63mm x 5.25mm
Note; photo shows all 'T' decoders

1.0 amp 6-function decoder with 8-pin NMRA/NEM652 plug.

1.3 amp 6-function decoder with 8-pin NMRA/NEM652 plug.