Finishing & Masking

115ml, which is sufficient to strip most paint* finishes over an area of approximately 575cm2.
* Note; except some cellulose, polyuretanes and factory finishes.
WILL NOT AFFECT MOST PLASTICS

Dual layer replacement filter

'Low-tack' fine line masking tape

'Low tack' fine line masking tape

65g tube of green putty/filler - fine grade

113.4g pack consisiting of two tubes. Simply mix together equal parts of each 'stick' to use. Suitable for sealing, bonding, filling etc. Can be sculpted, tapped, filed, painted etc when dry.

A clear, matt varnish supplied in a 28ml jar

65g tube of white putty/filler - standard grade

113.4g pack consisiting of two tubes. Simply mix together equal parts of each 'stick' to use. Suitable for sealing, bonding, filling etc. Can be sculpted, tapped, filed, painted etc when dry. This superfine version is particularly suited to the restoration of porcelain and other ceramics.

A clear, satin varnish supplied in a 28ml jar

A clear, gloss varnish supplied in a 28ml jar

Adhesive specifically developed for fixing clear parts on models

For use with decals/transfers to improve adhesion and to help conceal carrier film (28ml)

General purpose masking tape

Voltage; 220/240v
Air flow; 3 cubic metres per minute
Noise level; 47db
Size when open; 48 x 42 x 36cm
Size when closed; 42 x 15 x 24cm
Replacement filter HSE02 is available seperately.

Professional masking film for airbrushing graphics on almost anything!
Using Ultra Mask prevents underspray for crisp edges. Produce positive & negative masks to give a printed look rather than the stencil look. No gaps! Masking is ideal for airbrushing or any colour application technique.
Ultra Mask is a multi-medium, stretchable and flexible repositionable masking film. It is especially suited to conform to curved and irregular surfaces for painting. It is a thin film that cuts very easily with a craft knife. Ultra Mask can be effortlessly manipulated and repositioned.
Tinted film for easy reference and workability.
Low tack with secure adhesive strength.
Maximum stretch for irregularly shaped surfaces.
Solvent Proof!

Professional masking film for airbrushing graphics on almost anything!
Using Ultra Mask prevents underspray for crisp edges. Produce positive & negative masks to give a printed look rather than the stencil look. No gaps! Masking is ideal for airbrushing or any colour application technique.
Ultra Mask is a multi-medium, stretchable and flexible repositionable masking film. It is especially suited to conform to curved and irregular surfaces for painting. It is a thin film that cuts very easily with a craft knife. Ultra Mask can be effortlessly manipulated and repositioned.
Tinted film for easy reference and workability.
Low tack with secure adhesive strength.
Maximum stretch for irregularly shaped surfaces.
Solvent Proof!

Modelmates Water Soluble 200ml weathering aerosol.
Translucent Spray Dye - Not Acrylic Paint.
It makes things look dirty, old and weathered. Dries fast and is easy to use.
Spray it onto non-porous surfaces, let it dry, then smudge and wipe it with a damp cloth to create weathering effects. Wet it with water and it will dissolve similar to a water colour paint and can be brush applied.

Modelmates Water Soluble 200 ml weathering aerosol.
Translucent Spray Dye - Not Acrylic Paint.
It makes things look dirty, old and weathered. Dries fast and is easy to use.
Spray it onto non-porous surfaces, let it dry, then smudge and wipe it with a damp cloth to create weathering effects. Wet it with water and it will dissolve similar to a water colour paint and can be brush applied.

Modelmates Water Soluble 200 ml weathering aerosol.
Translucent Spray Dye - Not Acrylic Paint.
It makes things look dirty, old and weathered. Dries fast and is easy to use.
Spray it onto non-porous surfaces, let it dry, then smudge and wipe it with a damp cloth to create weathering effects. Wet it with water and it will dissolve similar to a water colour paint and can be brush applied.

Modelmates Water Soluble 200 ml weathering aerosol.
Translucent Spray Dye - Not Acrylic Paint.
It makes things look dirty, old and weathered. Dries fast and is easy to use.
Spray it onto non-porous surfaces, let it dry, then smudge and wipe it with a damp cloth to create weathering effects. Wet it with water and it will dissolve similar to a water colour paint and can be brush applied.

Modelmates Water Soluble 200 ml weathering aerosol.
Translucent Spray Dye - Not Acrylic Paint.
It makes things look dirty, old and weathered. Dries fast and is easy to use.
Spray it onto non-porous surfaces, let it dry, then smudge and wipe it with a damp cloth to create weathering effects. Wet it with water and it will dissolve similar to a water colour paint and can be brush applied.

Modelmates Water Soluble 200 ml weathering aerosol.
Translucent Spray Dye - Not Acrylic Paint.
It makes things look dirty, old and weathered. Dries fast and is easy to use.
Spray it onto non-porous surfaces, let it dry, then smudge and wipe it with a damp cloth to create weathering effects. Wet it with water and it will dissolve similar to a water colour paint and can be brush applied.

Modelmates Water Soluble 200 ml weathering aerosol.
Translucent Spray Dye - Not Acrylic Paint.
It makes things look dirty, old and weathered. Dries fast and is easy to use.
Spray it onto non-porous surfaces, let it dry, then smudge and wipe it with a damp cloth to create weathering effects. Wet it with water and it will dissolve similar to a water colour paint and can be brush applied.

Modelmates Water Soluble 200 ml weathering aerosol.
Translucent Spray Dye - Not Acrylic Paint.
It makes things look dirty, old and weathered. Dries fast and is easy to use.
Spray it onto non-porous surfaces, let it dry, then smudge and wipe it with a damp cloth to create weathering effects. Wet it with water and it will dissolve similar to a water colour paint and can be brush applied.

Supplied in a special dispenser with built in cutter.

Supplied in a special dispenser with built in cutter.

Supplied in a special dispenser with built in cutter.

The three colours in this set are sand, light sand and mud. Colours are supplied on a pallette in a dispenser that includes a brush/sponge applicator.

The three colours in this set are rust, soot and snow.

Supplied in a pen type dispenser. Ideal for subtle weathering on raised detail.

Supplied in a pen type dispenser. Ideal for subtle weathering on raised detail.

The three colours in this set are orange (for orange tinted rust finish), gun metal (for dark metal finish) and silver (for worn metal edges). Supplied in a handy pallette with sponge/brush applicator.

Supplied in a pen type dispenser. Ideal for subtle weathering on raised detail.

Supplied in a pen type dispenser. Ideal for subtle weathering on raised detail.

The three colours in this set are burnt blue (for burnt metal finish), burnt red (for scorched metal finish) and oil stain. Supplied in a handy pallette with sponge/brush applicator.

The three colours in this set are yellow (light brake dust), grey (underframe dirt) and dark green. Supplied in a handy pallette with sponge/brush applicator.