Finishing & Masking > General products

115ml, which is sufficient to strip most paint* finishes over an area of approximately 575cm2.
* Note; except some cellulose, polyuretanes and factory finishes.
WILL NOT AFFECT MOST PLASTICS

'Low-tack' fine line masking tape

'Low tack' fine line masking tape

65g tube of green putty/filler - fine grade

113.4g pack consisiting of two tubes. Simply mix together equal parts of each 'stick' to use. Suitable for sealing, bonding, filling etc. Can be sculpted, tapped, filed, painted etc when dry.

A clear, matt varnish supplied in a 28ml jar

65g tube of white putty/filler - standard grade

113.4g pack consisiting of two tubes. Simply mix together equal parts of each 'stick' to use. Suitable for sealing, bonding, filling etc. Can be sculpted, tapped, filed, painted etc when dry. This superfine version is particularly suited to the restoration of porcelain and other ceramics.

A clear, satin varnish supplied in a 28ml jar

A clear, gloss varnish supplied in a 28ml jar

Adhesive specifically developed for fixing clear parts on models

For use with decals/transfers to improve adhesion and to help conceal carrier film (28ml)

General purpose masking tape

Voltage; 220/240v
Air flow; 3 cubic metres per minute
Noise level; 47db
Size when open; 48 x 42 x 36cm
Size when closed; 42 x 15 x 24cm
Replacement filter HSE02 is available seperately.

Dual layer replacement filter

Professional masking film for airbrushing graphics on almost anything!
Using Ultra Mask prevents underspray for crisp edges. Produce positive & negative masks to give a printed look rather than the stencil look. No gaps! Masking is ideal for airbrushing or any colour application technique.
Ultra Mask is a multi-medium, stretchable and flexible repositionable masking film. It is especially suited to conform to curved and irregular surfaces for painting. It is a thin film that cuts very easily with a craft knife. Ultra Mask can be effortlessly manipulated and repositioned.
Tinted film for easy reference and workability.
Low tack with secure adhesive strength.
Maximum stretch for irregularly shaped surfaces.
Solvent Proof!

This superb set includes a high power desktop air compressor with a superb gravity feed airbrush - plus a braided hose & airbrush holder. Everything you need to get a quality finish on your models!

Single action, external mix airbrush suitable for spraying enamels or acrylics (after thinning). Operates on 15-50 PSI with an adjustable spray pattern of 3/4" to 2". Supplied with 1/4" adapter but will require 'air' source to operate.

Great value airbrush starter set which includes bottom feed airbrush with paint jar, propellant and connections.

Great value airbrush starter set which includes gravity feed airbrush with propellant and connections.

Supplied in a special dispenser with built in cutter.

Supplied in a special dispenser with built in cutter.

Supplied in a special dispenser with built in cutter.